Fourtrak Diesel Core Plugs

Forum: 

Does anyone know if there are core plugs in the head of a 1988 2.8 diesel fourtrak?

Mine has started leaking water from what looks like a small hole for a core plug just below and a bit to the left of one of the middle lower studs for the exhaust manifold on the head. Hard to see exactly cos the turbo assembly is a bit in the way

Water is not leaking to the engine internally, the oil is OK. Couldn't find any reference to core plugs in the manual I have.

So before I dismantle it and turn it into a non runner...is there a core plug or am I in trouble and has the head cracked?

Many Thanks, Dave

Dave I am pretty certain the

Dave
I am pretty certain there are. About 1cm in diametre. 4 of them, just above the level of the head/block mating surface.

The manual you have. Is it a Daihatsu one? If so, look for page EM-15 in Engine Maintenance. This shows the head exploded, and while it doesnt show the plugs, it shows the holes.

Growing old is compulsary, growing up isnt, and
MUD MAKES EXCELLENT TOOTHPASTE

Please visit http://groups.msn.com/AussieDaihatsuRocky/_whatsnew.msnw

Growing old is compulsary, growing up isnt.
MUD MAKES EXCELLENT TOOTHPASTE.
I use billion dollar satellites, to find Tupperware.
Please visit http://groups.msn.com/AussieDaihatsuRocky/_whatsnew.msnw
All views and advice offered are my own, from my ow

Not so certain

Yep, those are the holes, and I have the picture you refer to.

Unfortunately, after much struggle removing the manifold and turbo assembly, and poking a screwdriver down the hole, it felt suspiciously like a head stud, not a core plug blocking the hole.

I took the rocker cover off and removed the head bolt and loads of water poured out. So, unless someone can come up with a better idea, I reckon I will have to tap the hole to 16mm or so and screw a plug in. Anyone got any better ideas?

Thanks, Dave