F78 2.8TDX Panard bushes & rear anti-roll bar


Hi All,

My 'Trak is coming up for her next MOT in April, and what with cash being a bit tight, I'm starting the bits that need doing now.
It's basically just all the supplementary suspension bushes, so front and rear anti-roll bars and the bushes on the panard on the rear.

I have a couple of questions...firstly; where exactly is the rear ARB located? I will have a good look when I can, but at present it's wet outside and I'm at work. Also, will I likely need the rear anti-roll bar links: http://www.milneroffroad.com/img/productImages/11236.JPG or in peoples experience are they usualy in ok condition (my truck hasn't done much off-roading in it's life).

Secondly looking on Milner off-road there are two different bushes for the panard, this is the chassis end one: http://www.milneroffroad.com/img/productImages/11606.jpg and this is the axle end one: http://www.milneroffroad.com/img/productImages/10013.jpg

However, having looked at the panard rod on mine, BOTH ends look to have the same bushes and fittings as the chassis one. Can anyone shed some light on this? I don't want to be buying parts I don't need, and not buying the parts I do.

Thanks in advance for any help!


panard bushes

the bushes are different at each end, chassis end bushes are smaller versions of the trailing arm bushes the axle end are shamfered.