Forum:
First of all thanx to evryone for the help with my fuel drain problem, it's working fine now. I have another you knowledgable persons maybe able to help me with. My car is an 89 fourtrack (uk Spec) and i desperately need a wiring diagram of any sort, can someone help?
F50 RV H/T (1984)
Hi anyone
I have inherited an 1984 F50 to which I have to replace the cylinder head, and without a manual I have no idea what the 4 rubber washers and 4 silver "cups" are for on the rocker assembly or where they go. Neither have I any idea of tappet settings
Can anyone help please?
They should be the seals and
They should be the seals and nuts for the 4 tappet cover bolts. The bolts protrude through the top of the tappet cover. Fit the rubber washers first, then the cup head nuts.
Cheers
David
Growing old is compulsary, growing up isnt, and MUD MAKES EXCELLENT TOOTHPASTE.
Please visit http://groups.msn.com/AussieDaihatsuRocky/_whatsnew.msnw
All views and advice offered are my own, from my own experiences. Take such advice at your own risk.
Growing old is compulsary, growing up isnt.
MUD MAKES EXCELLENT TOOTHPASTE.
I use billion dollar satellites, to find Tupperware.
Please visit http://groups.msn.com/AussieDaihatsuRocky/_whatsnew.msnw
All views and advice offered are my own, from my ow
F50
Thankyou.
I really feel a tit not noticing there are FOUR rocker cover posts !!
The "steel cups" are not the fixing nuts though,I have those. There are 8 "cups" and I presume they sit on the tops of each valve before fitting the rocker shaft in place.
I don't suppose you know what the tappet sizes are as well do you?
Once again thanks for your help
send me a private message
Send me a private message with you E-mail address, I will mail you them.
Cheers
H
Cheers
H