Forum:
hi ive had a falty temp gauge for a while now on my p reg rocky [eratick movement then die to cold] but now its stopped alltogether
any advice on were to start ie [easy fix]
thanks
hi ive had a falty temp gauge for a while now on my p reg rocky [eratick movement then die to cold] but now its stopped alltogether
any advice on were to start ie [easy fix]
thanks
Does the fuel gauge follow
Does the fuel gauge follow suit? They share a power suply. Otherwise try taking the sender out of the engin and giving it a good clean. Check all conections you can locat for good contact.
Any veiws expresed in this thread by me are purely from my own experience, and (sometimes) falible memory. Hope my comments help, but please don't take them as gospel.
Any veiws expresed in this thread by me are purely from my own experience, and (sometimes) falible memory. Hope my comments help, but please don't take them as gospel.
gauge
thanks
Have you ever used some sort
Have you ever used some sort of pour into the radiator leak sealer. If so, it can coat the sender and give bad readings.
Take the 2 senders out- both are just below the thermostat housing, one is the temp gauge, one is for the glow plug circuit, and give them a good clean off.
Growing old is compulsary, growing up isnt.
MUD MAKES EXCELLENT TOOTHPASTE.
I use billion dollar satellites, to find Tupperware.
Please visit http://groups.msn.com/AussieDaihatsuRocky/_whatsnew.msnw
All views and advice offered are my own, from my ow
Growing old is compulsary, growing up isnt.
MUD MAKES EXCELLENT TOOTHPASTE.
I use billion dollar satellites, to find Tupperware.
Please visit http://groups.msn.com/AussieDaihatsuRocky/_whatsnew.msnw
All views and advice offered are my own, from my ow
gauge
thanks mate
seams to have done the trick,thanks to all who have given advice
Guage
Remove the wire from the sender unit and with the engine running, short it to a good earth and hold it there, look in the vehicle at the guage, it should climb rapidly to the hot position. If it does this it is the sender unit, replace it and all should be well.
guage
thanks were abouts is the sender unit
and how is it removed