Forum:
Hey peeps,
a friend of mine (well, a friend of a friend) is selling a set of 4 spacers, think they came off a Peugeot . . .
Anyway, I've asked him for the dimensions and they are as follows . . . 140mm, 72mm and 62mm. They are 25mm thick (giving 50mm total width). Think they are hubcentric and universal . . .
I'm guessing there is no chance of these fitting the YRV, but can someone confirm if possible?
Cheers guys and galls! 
Spacers on ours are a bit of
Spacers on ours are a bit of a one off. I wouldn't recommend going any further than 5mm on each side, especially on the rears. The centre bore on the YRV and Sirion are 54.4mm and I would get hubcentrics with a 4 x 100 PCD spacing. Oh and I recommend spacers with replacement longer studs. When I tried my H&R ones without them I could only manage 5 complete turns of the wheel nuts.
-------------------------------------------------------------------------
'12' Plate Mazda MX-5 2.0 litre NC 3.5 Venture Roadster 160BHP
'15' Plate SEAT LEON 184 FR TDI. 240BHP/500nm Torque.
Past: '53' Plate Yellow YRV Turbo Approx. 150BHP