Forum:
Hey Drivers,
I am wondering wether the AC/Heater panel on the 4Trak is usually backlit?
Mine (1998 4Trak SWB) is not, and is really hard to see at night. Is it that my bulbs are blown or other problem, or is it that it's just not intended to be backlit?
Hope I am being clear enough with my explanation.
Thanks
Yes, thay should all be lit.
Yes, thay should all be lit.
Blown Bulbs
Guess my bulbs are out then.
Will look into it.
Thanks.
Blown bulbs
Its a two minute job.
Pull off the end caps of the controlling levers.
Then using a wee allen key, use this as a 'hook' in the lever slits to pull the panel off its clips.
Unplug the single bulb holder (half-turn anti-clockwise).
Pull the wee bulb out and replace (99p.)
Re-position the plate and press back into its clips.
Replace end-caps on the levers.
Job done!
Cheers, Terry
Great
Greeeaat,
I thought I would have to remove the whole dash.
Thanks a lot for the tip Terry. Appreciated.