Fortrak can't get reverse

Forum: 

On Saturady Our P reg, 50k mile, Fourtrak TDL suddenly won't let me engage reverse. No horid noises, all other gears fine, clutch appears OK. After approx 50 continous attempts it suddenly popped in perfectly. Then again this morning and after 30 tries in it went.

Any ideas, how expensive or tricky can it be.
Thanks
David

do you off road it?

do you off road your 4trak if you do then it might be silt and mud in the gearbox i have a mate with a range rover with the same proplem hope this helps Wink

If you look at the first link

If you look at the first link, you will see I answered it. If the reverse pivot bolt has dropped out, you WILL NOT get reverse, no matter how many attempts you make. I would be more inclined to check you clutch adjustment. See if there is any slack at the firewall adjuster. As mentioned elsewhere, with the square cut gears of reverse, it can be harder to engauge than a forward gear.
Growing old is compulsary, growing up isnt, and
MUD MAKES EXCELLENT TOOTHPASTE

Growing old is compulsary, growing up isnt.
MUD MAKES EXCELLENT TOOTHPASTE.
I use billion dollar satellites, to find Tupperware.
Please visit http://groups.msn.com/AussieDaihatsuRocky/_whatsnew.msnw
All views and advice offered are my own, from my ow