Forum:
help needed please, just bought a 94 lreg fourtrak independent, the fwd dosent seem to be working, the 4wdh switch does not light up when pressed in, is there a simple way to test if the 4wd is working, thanks in advance
help needed please, just bought a 94 lreg fourtrak independent, the fwd dosent seem to be working, the 4wdh switch does not light up when pressed in, is there a simple way to test if the 4wd is working, thanks in advance
4WD
Hi, Put the car in 4WD, Jack up one front wheel and try turning it, If it turns look to see if the front half of the front prop is turning but the back half is not. If this is the case then the telescopic joint on the prop has failed.
Worth a look.
Good Luck!
4wd
i have the same problem, the 4wh switch does not illuminate when pressed in, when i put the truck in 4wd it goes sluggish as it should, but the front wheels are not engaged, help its driving me mad, cheers
I had this same issue when I
I had this same issue when I bought my F78.
The 4x4 is engaged via vacuum switches and solenoids in the tob of the gearbox. These are prone to seizing, especially if not used for an extended time period. I had to have my box taken out and the vacuum switch replaced and it was not cheap by any means. The switch alone was AUD$200, plus a lot of labour time.