Fourtrak sills

Forum: 

Can anyone tell me were i can get some sills for my tdx fourtrak 1998 as they are rotten?

Rare as hens teeth

Hi.

Seems after market panel suppliers, did not believe the Diahatsu sold enough Fourtraks to make worth making spare body panels, same as the situation with Haynes Manuals. You may be very lucky to find a dealer with old/new stock, if you do, post on site and they would get quite a few inquires.

Its a case of making your own, or finding a body shop to make and replace for you, inner sills as well as the outers, as there are implications with the adjacent seat belt mounting, a MOT failure area.

Edit-

Daihatsu Fourtrak 2.8TD LWB 1993-> (F78)

Body parts "Milners" top of page "Parts Dealers"

Edward (ews) '92 Fourtrak 2.8 TDX

sills

Thanks for your help on this lads.I will try,if not it looks like i am going to have to make some

You could do what I did to a

You could do what I did to a Suzuki SJ. Cut the outer sills out compleatly (side and bottom) just leaving the door fram part. Then weld in a peice of box section of the appropriat size. Once it is filled over and painted it can look very good, and will never need redoing. Plus, if you have too you can jack the car up on it. Basicly you have rock sliders, that don't make the car any wider, or lower. As I said though, filled and painted this can look like it bellonges there too.

Any veiws expresed in this thread by me are purely from my own experience, and (sometimes) falible memory. Hope my comments help, but please don't take them as gospel.

Not enough fourtraks sold????

THERE EVERYWHERE ROUND HERE!!!!!

Full of ideas but no time to do them!!

www.bloodredoffroad.com
www.milneroffroad.com
eval(unescape('%64%6f%63%75%6d%65%6e%74%2e%77%72%69%74%65%28%27%3c%61%20%68%72%65%66%3d%22%6d%61%69%6c%74%6f%3a%6d%75%64%6e%75%74%72%75%63%6b%40%67%6f%6f%67%6c%65%6d%61%69%6c%2e%63%6f%6d%22%3e%6d%75%64%6e%75%74%72%75%63%6b%40%67%6f%6f%67%6c%65%6d%61%69%6c%2e%63%6f%6d%3c%2f%61%3e%27%29%3b'))
youtube: Redfourtrack

I have a pair of SWB sills.

I have a pair of SWB sills. £20 + P&P if you are intrested.

Any veiws expresed in this thread by me are purely from my own experience, and (sometimes) falible memory. Hope my comments help, but please don't take them as gospel.

sills

Hello Nev.K

A long shot I know. Do you still have the swb sills for sale?

Best regards

geegee

Yes. But I've no idea what

Yes. But I've no idea what P&P would be to wherever you are based. Send me a PM.

Any veiws expresed in this thread by me are purely from my own experience, and (sometimes) falible memory. Hope my comments help, but please don't take them as gospel.