tappets, and rear light loom

Forum: 

hi all, doz any1 know what the gaps r for the tappets and what order u do them in on 98 fourtrak plz. or and rear top lights on mine r blankd off, doz any1 no if diahatsu leave the loom in, as i want to do away with the bottom lights. thanks dean

Plese don't write in text

Plese don't write in text speak. I'm dyslexic, and have enough trouble reading without it.
Don't know about tapet gap.
No the wiering loom is not in the truck. It is very easy to make your own with 7 core trailer light wire. Taking feeds from the lights in the bumper, or from the feed to the trailer socket. One more wire for the reversing lights, and Bob's your teapot. One thing to remember, when you get your piller light clusters you will also need the 3 plastic (usualy yellow) fittings out of the body of the donner car. These are what the fixing screwes for the cluster screw into. You will also need the screwes. Fourtrak clusters will also fit.

Any veiws expresed in this thread by me are purely from my own experience, and (sometimes) falible memory. Hope my comments help, but please don't take them as gospel.

tappet gaps

The tappet clearances is 10 thou for inlet and 14 thou exhaust cold cant tell in mm it will be on a good set of feeler gauges.The loom is a plug and play so find a scrap one with lamps fitted and just disconnect and unthread from car.Usually got these when tow bar fiited when new.Hope this helps Mick49

Mick H