Forum:
Hi
I've been restoring one of these as a bit of a project, and I have learned a lot. Still got some of the awkward bits to do
Can anyone help with a simple way to access the bulbs behind the heater operating dials
Thanks for your help ---- John
Simple job....
From memory when I changed the bulbs for LEDS. If it's anything like the YRV centre console, it's a case of pulling away the surround on clips to access the screws that hold the heater controls in place. Once heater control panel is loose remove the 2 or maybe 3 connectors from behind the panel. Then to take the front off you need to pull the 3 control knobs. The bulbs should then be accessible.
Have a look in the image gallery under modifications as there maybe some pics to help.
-------------------------------------------------------------------------
'12' Plate Mazda MX-5 2.0 litre NC 3.5 Venture Roadster 160BHP
'15' Plate SEAT LEON 184 FR TDI. 240BHP/500nm Torque.
Past: '53' Plate Yellow YRV Turbo Approx. 150BHP
Simple job
Thanks for your reply -- I thought it would be something like that, but I was hoping for one of those simple solutions that someone comes up with after I have struggled for hours, and scrapped half the dash.
I'll have a go tomorrow ---
Best wishes-------
John Turner