Forum:
Does anyone know where I can get a Daihatsu logo either as just the "D" symbol and the word Daihatsu or the symbol and Sportrak to stick onto my spare wheel cover.
The only supplier I have found only sells a stickon with the words "DIAHATSU SPORTRAK" in a normal print font and no logo.
Logos
Is the cover a solid cover or a vinyl cover, either way you can paint the logo on.
With a solid cover, use masking tape and cover the area, trace the logo and, if necessary go to your nearest copy shop and have it enlarged. Stick the logo to the masking tape, and with a SHARP craft knife, cut round the logo, peel the cut portion of masking tape away, wet flat carefully and spray the logo on.
With a vinyl cover it is slightly different, stick the masking tape to a sheet of clean plastic, cut the logo out, peel off the plastic and stick to the cover, using vinyl paint, spray the area.
This takes time and patience, but the benefits are a bespoke design or colour, and only minimal costs.
logo
I found that with the sign writers use vinyl transfers that stick straight on but you have to make sure the area is clean of any dirt or grease and are dead easy to fit. That way you can get what ever you want and custom it to what ever you wont. I asked to get a stags head done for the bonit of my daihatsu and it was quite large and it was only going to cost me 30 pound whith i thought was good and he was going to put it on as well but i haven't got it done yet.
logos
if you go to your nearest sign writer you will probably find they can make one up and put it on sticky vinyl and you can put that on as i got one made up for my number plate light.
As Royster says your best
As Royster says your best bet will be a signwriter. As they would be able to make one up easy enough from obtaining the "vector" graphics for the logo, probably off the internet and creating one for you.
____________
03 Reg Yellow YRV Turbo!
____________