Forum: ProblemsHI DOES ANYBODY NO THE TORQUE SETTINGS FOR THE CYLINDER HEAD BOLTS PLEASE Log in or register to post comments 117.7 +/- 9.8 Nm From my F70, F75, F77 Service manual: "Apply engine oil to the threaded portion and seating surface of each bolt" "Tighten the cylinder head bolts progressively in the sequence as indicated by the illustration" - see link below. http://www.daihatsu-drivers.co.uk/node/12743 Tightening torque: 117.7 +/- 9.8 Nm 12.0 +/- 1 kgfm 1985 Veg oil burning Fourtrak "Rocky". Log in or register to post comments Foot pounds To get foot pounds, multiply Nm by 0.738 Log in or register to post comments Torque settings I think possibly your Torque wrench may have Foot pounds and Newton metres indicated on the shaft adjuster. Well the two I have do, a 1/2" drive and 3/4" drive, but they are many years old. Take a look . Edward (ews) '92 Fourtrak 2.8 TDX Log in or register to post comments
117.7 +/- 9.8 Nm From my F70, F75, F77 Service manual: "Apply engine oil to the threaded portion and seating surface of each bolt" "Tighten the cylinder head bolts progressively in the sequence as indicated by the illustration" - see link below. http://www.daihatsu-drivers.co.uk/node/12743 Tightening torque: 117.7 +/- 9.8 Nm 12.0 +/- 1 kgfm 1985 Veg oil burning Fourtrak "Rocky". Log in or register to post comments
Torque settings I think possibly your Torque wrench may have Foot pounds and Newton metres indicated on the shaft adjuster. Well the two I have do, a 1/2" drive and 3/4" drive, but they are many years old. Take a look . Edward (ews) '92 Fourtrak 2.8 TDX Log in or register to post comments
117.7 +/- 9.8 Nm
From my F70, F75, F77 Service manual:
"Apply engine oil to the threaded portion and seating surface of each bolt"
"Tighten the cylinder head bolts progressively in the sequence as indicated by the illustration" - see link below.
http://www.daihatsu-drivers.co.uk/node/12743
Tightening torque:
117.7 +/- 9.8 Nm
12.0 +/- 1 kgfm
1985 Veg oil burning Fourtrak "Rocky".
Foot pounds
To get foot pounds, multiply Nm by 0.738
Torque settings
I think possibly your Torque wrench may have Foot pounds and Newton metres indicated on the shaft adjuster. Well the two I have do, a 1/2" drive and 3/4" drive, but they are many years old. Take a look .
Edward (ews) '92 Fourtrak 2.8 TDX