Forum:
Hello , can any body confirm if on my `99 Terios that the front callipers are push back pistons of screw back type 
Also does any body have any idea where i can get a bonnet gaurd/ wind diflector for for the same vehicle?
Many thanks , hope any body can help?
climair for wind deflectors
Try here for wind deflectors;
http://www.climairuk.com/home.php?cat=6
Had them on my YRV for 2 years now, and seem to be vey good.
-------------------------------------------------------------------------
'12' Plate Mazda MX-5 2.0 litre NC 3.5 Venture Roadster 160BHP
'15' Plate SEAT LEON 184 FR TDI. 240BHP/500nm Torque.
Past: '53' Plate Yellow YRV Turbo Approx. 150BHP
They are push back type, but
They are push back type, but be careful if your vehicle is ABS equipped as it needs a different procedure.
Use a "G" cramp to push them back, but if it is ABS equipped you will need to clamp the flexi pipe to stop fluid returning up the pipe. Then open the bleed nipple to release the fluid as the piston is pushed back, obviously you will need to bleed the caliper.
If you allow fluid up the pipe it can damage the ABS modulator, a new one and programming will be in excess of