Forum:
I have a saggy back end and have just bought some replacement springs, but i can't see how to get the old ones out. if someone could please help me by letting me know what I have to disconnect or remove so I can replace my rear springs.
Thanks
leave the suspension arms
leave the suspension arms connected at the front.. undo the rear swaybar on each side.. also the 2 arms going up to the the chasis need to be disconnected... jack the rear of the trak up high put stands under the chasis holding the rear up.. put a jack under the rear axle and when all is unbolted lower it down till the springs nearly fall out.. you might need to pull on them a bit... then reverse with the new springs.. will be harder to get back in though as they will be bigger... hope that helps.. give yourself a day if you have not done it before...