Forum:
Hi
I have a 1991 sportrak 1.6 efi (Rotten) and want to take the engine out and put it in my 1997 riviera (Smokes like a trooper and lacks power). Both engines have hd stamped on them but the older one has a different distributor on it with an extra vacuum pipe also the inlet manifold has an extra pipe.Will these bits fit from my 97 engine on to the 91 engine. Have any of the internal bits been changed on these engines ie upgraded or are they exactly the same inside even though they are 6 years apart.
Kind regards
Marc.
all the same
all the same put an inj engine in my carbed sporty and all bits swapped over fine the only trouble i had was the input shaft on the box was slightly bigger to fit in the crank my orignal engine had a brass collet in the crank and the new one had a bearing in it so just keep an eye for that as spent a little while trying to get to fit back together to relisr there was about 2mm diffance in the input shaft but you have the other box anyway so worse case change the box aswell
clive
1.1/2 body lift 1.1/2 shackle lift snorkel webber carb conversion 31/10.5/15 muds on weller wheels