I am hoping you can give me some advice. I have a R Reg (1997) Move Plus with an ED-20 engine. My owner's manual tells me to set the Valve clearances to:-
For information, I have just renewed my 2005 Sirion's discs as they were warped - or so the garage and I thought. The actual cause seems to have been flecks of rust between the disc and hub - lodged there when the tyres were changed I guess. Poor design I think as there is a reasonable gap between the hub circumference and the disc's bore - most car's have a narrow gap, a mild interference or better still, a screw to hold the disc in place. So the message is: take car after you change tyres as the disc is a very loose fit.
I have had problems with my 2000 registered Sirion for a few months.
When the engine is warmed up the rev counter shows 2000 revs per minute whilst idleing. When cold the revs are very low and the engine sometimes cuts out.
My garages diagnostic machine identified a faultly coolent temprature sensor, they replaced the sensor which appears to have helped, but not solved the problem.
I've been getting some real problems wit hte CD player it keeps saying Error #6 to any cd i put in it's so bad infact that I'm going to have a new cd player put in, but that means loseing the some storage space, dose any one know if you can get a blank face for the center concel?
ive been searching the internet and i can find head bolts for many other makes but not for my sporttrak is it a case of putting the old ones back in and re tourque them or is there some place that sells them i thought milners or jap4x4spares would any recomendations
There's a leak in the radiator of my 1997 Grand Move (1.5ltr petrol). As it's a Japanese import the garage reckons they will have difficulty sourcing a new one if it has to be replaced. I'm wondering if the radiator in the Grand Move is compatible with the radiator any other Daihatsu model? Any suggestions would be appreciated.
I have a 97 993cc Hijet.
It will not start, and no sparks.
Electronic Ignition is new to me, aged 63.
I relly need a wiring diagram of the ignition circuits.
I have changed the ECU, - no sparks. There is 12v at the coil.
I wonder if an older vehicle distributer with points and normal coil can be fitted also, but if anyone can help, it would be good.
Ernie
I am brand new to this site so a big hello!
I am just wondering if anyone can assist me?Ive got the above vehicle that i am after getting rid of but the first gear was chipped(i think) by the previous lady that i bought it off.This has resulted in a whine in 1st gear which has then resulted in a car that many people will now not touch in fear that the gearbox will explode!!
